K18300 Roll Stability Tester


 

Test Method
Provides an indication of shear stability of lubricating greases by testing the change in worked penetrations after two hours in the roll stability tester.

Features and Benefits
• Conforms to ASTM D1831 and related specifications

• Single, double and four-unit models

• Microprocessor programmable high accuracy temperature control

• High Temperature model available


 

K18300 Roll Stability Tester
Standard Models – Roll stability apparatus for shear stability tests on lubricating greases. Rotates steel test cylinders at 10 or 165rpm in a thermostatically controlled environment at temperatures of up to 200F (93.3C). Drive system is powered by a rugged ratio motor, and interchangeable drive chain sprockets are easily accessible for converting unit to either operating speed. Microprocessor PID control provides quick temperature stabilization without overshoot and is protected by an overtemperature control circuit that interrupts power should temperature exceed a programmed cut-off point. Dual LED displays provide actual and setpoint temperature values in C/F format. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. A balanced cast aluminum fan and 1200W heater provide efficient, uniform heat distribution. A dial thermometer in the hinged cover displays chamber temperature. Heaters and drive chain mechanism are shielded for operator safety. Insulated steel cabinet and base are finished with a durable polyurethane enamel finish.

High Temperature Models – A high temperature model is also available that expands the temperature range to 320F (160C). Tests can be conducted using the high temperature model unit for time/temperature specifications beyond those listed in existing D1831.

Specifications
Conforms to: ASTM D1831, MIL-G-10924SA

Maximum Temperature: 200F (93C)

Temperature Control Stability: 2F (1C)

Electrical Requirements (Single and double unit models):
115V 60Hz, Single Phase, 10.5A
220-240V 50Hz, Single Phase, 5.5A
220-240V 60Hz, Single Phase, 5.5A

Included Accessories
Test Cylinders with threaded end caps and O-ring seals
Test Rollers, steel, 5kg

Dimensions lxwxh,in.(cm)
Single-Unit: 16.5x18.4x15 (42x47x38)
Double-Unit: 16.5x18.4x15 (42x47x38)
Four-Unit: 25x18.4x15 (64x47x38)
Net Weight:
Single-Unit: 98 lbs (44.4kg)
Double-Unit: 116 lbs (52.6kg)
Four-Unit: 187 lbs (84.8kg)

Shipping Information

Shipping Weight:
Single-Unit: 142 lbs (64.4kg)
Double-Unit: 175 lbs (79.4kg)
Four-Unit: 270 lbs (122.5kg)
Dimensions:
Single-Unit: 7.7 Cu. ft.
Double-Unit: 9.8 Cu. ft.
Four-Unit: 16.6 Cu. ft.


Ordering Information

 

Mechanical Grease Workers

 

Catalog
Number

Product Description

Electrical Requirements

Roll Stability Tester - Standard Models

K18300

Single-Unit Model

115V 60Hz

K18305

Single-Unit Model

220-240V 50Hz

K18306

Single-Unit Model

220-240V 60Hz

K18320

Double-Unit Model

115V 60Hz

K18325

Double-Unit Model

220-240V 50Hz

K18326

Double-Unit Model

220-240V 60Hz

K18340

Four-Unit Model

115V 60Hz

K18345

Four-Unit Model

220-240V 50Hz

K18346

Four-Unit Model

220-240V 60Hz

Roll Stability Tester - High Temperature Models

K18341

High Temperature Four-Unit Model

115V 60Hz

K18347

High Temperature Four-Unit Model

220-240V 50Hz

K18348

High Temperature Four-Unit Model

220-240V 60Hz


Accessories

 

Catalog
Number

Product Description

K183-0-1A

Test Cylinder
Plated steel with threaded end caps and O-ring seals.

K183-0-4

Steel Cylinder Roller


 

 EquiLab